摘 要
本设计为广州市某医院的空调系统,拟为之设计合理的空调系统,为室内工作人员和病人提供舒适卫生的环境。
设计前参考了大量的相关资料，依据有关规范考虑节能和舒适性要求，并结合建筑的特点，设计对该楼一至五层采用风机盘管加新风的空调方式，通过改变阀门可以随意调节，使用方便，调节灵活，且舒适性高。
第六层为手术层，有较高的洁净要求。根据相应的规范，我对该层进行了详细的计算和设计，力求充分满足手术室对洁净环境的要求。
本文在水系统的设计上，采用闭式双管制异程式系统。使系统得到简化，降低初投资，同时有利于水利平衡，其详细布置方法参见水系统图。
本文严格按照手册与规范要求进行设计与计算，并将手算与软件计算相结合，从而比较深刻地体会了空调系统的设计过程，并编写了比较严谨的设计与计算过程。
关键字：医院，空调系统，风机盘管—新风系统，洁净度, 洁净室
Abstract
This project designs a air conditioning system for a Hospital in Guangzhou City, so as to create a comfortable and clean indoor environment for the stuff and patients.
Before the design,I had done a lot of related research. According to some correlation standard, allowing for energy conservation and indoor comfort, plus the feature of the building, Fan coil units (FCUs)--fresh air conditioning system is proper for 1-5 floors. This system is easy to use and is flexible to adjust by vavle to meet different needs.
The sixth layer is for surgery, a higher cleanliness requirements. According to the corresponding standard, I have conducted detailed calculation and design，Striving to meet the requirement of clean environment for surgery.
on the water system design, I adopt closed-system control program varies. Allowing the system to be simplified and lower initial investment, in addition it is conducive to water balance, the details can be seen in the layout of the water system maps.
According to the manual and the norm, I carry on calculation strictly, and combine calculating by software together with calculating by hand, so that I realize the process of air condition system’s design more and deeply, and draw up more careful design and calculation process.
Key words: hospital,air conditioning, Fan coil units (FCUs) -- fresh air system, clean class, clean room
目 录
前 言 ………………………………………………………………………………1
第一章 工程概况 …………………………………………………………3
1.1 工程简介 …………………………………………………………3
1.2 建筑信息 …………………………………………………………3
第二章 负荷计算 ……………………………………………………… 4
2.1 室外设计参数………………………………………………………… 4
2.2 设计依据…………………………………………………………4
2.3 1001值班室详细负荷计算………………………………………………4
2.3.1室内设计参数……………………………………………………… 4
2.3.2空调冷负荷计算（不含新风）…………………………………… 4
2.3.3空调热负荷计算（不含新风）…………………………………… 9
2.3.4 空调湿负荷（不含新风）…………………………………………10
2.3.5 新风冷负荷计算 …………………………………………………10
